CONVEYOR BELT ACCESSORIES

Type: CTS PIG TAIL & PW
PIG TAIL CABLE CARRIER
TYPE: PT150

In order to carry the pull wire between the non-intelligent pull keys a PT150 is mounted on the structure at 3-meter centers.

TYPE: CTS PW
PULL WIRE

The CTS PW is a PVC coated stainless steel wire that is used to activate the tripping of  non intelligent pull keys CTS 100.

Type: CTS PCC

PULLCABLE CARRIER

In order to carry the pull cable between the pull keys and to the various belt protection units, a cable carrier is mounted on the conveyor structure at 3m centers. The pull cable carrier consists of a 10mm threaded rod and a high impact
Polycarbonate glass reinforced oxidation resistant hook. This configuration provides GALVANIC ISOLATION between the conveyor structure and the pull cable.

Type: CTS PC

PULLCABLE

The pull cable is South African make, consists of 6 cores
(2 x 2.5 + 4 x 1mm5), strengthened with High tensile steel braiding. The cable is mounted between the pull keys on pull cable carriers and acts as a pulling mechanism as well as an electrical conduit's pull cable has a pulling strength of 1500kg. The outer sheet of the cable is made of black PVC which provides a UV protection for out door use and it's flame retardant.Current consumption up to 100mA.

Type: CTS TK

TERMINATION KITS

To terminate the pull cable between the pull keys, a termination kit is used, consisting of a cable clamp and a steel hook. The cable clamp is attached to the pull cable in a grip mode, tightened with 6 screws, and the steel hook is hooked to the pull-key pulling mechanism.